Lexmark 7000 Color Jetprinter Service Manual

Lexmark 7000 Color Jetprinter Manual

Get Lexmark 7000 Color Jetprinter PDF manuals and user guides View all Lexmark 7000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark 7000 Color Jetprinter manual content summary:

  • Lexmark 7000 Color Jetprinter | Service Manual - Page 1
    Color Jetprinter™ 7000 4092-001 • Table of Contents • Start Diagnostics • Safety and Notices • Trademarks • Index • Main Menu Lexmark is a trademark of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc.
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 2
    any way it believes appropriate without incurring any obligation to you. Lexmark is a trademark of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc. Other trademarks are the property of their respective
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 3
    2-6 Envelope Feed Service Check 2-6 First Print Line Service Check 2-6 Maintenance Station Service Check 2-7 Paper Feed Service Check 2-8 Paper Path Service Check 2-10 Parallel Port Service Check 2-11 Power Service Check 2-11 Print Quality Service Check 2-12 Transport Service Check 2-15
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 4
    Assembly Removal 4-12 Maintenance Station Assembly Removal 4-13 Maintenance Wipers and Caps Removal 4-13 Manual Insert Tray Removal 4-13 Mid Frame Assembly Removal 4-13 Paper Feed Motor Removal 4-14 Paper Guide and EOF Flag Assembly Removal 4-14 Paper Load Door Removal 4-16 Pick Roll Shaft
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 5
    4092-001 Preventive Maintenance 6-1 Lubrication Specifications 6-1 Parts Catalog 7-1 How To Use This Parts Catalog 7-1 Assembly 1: Covers 7-2 Assembly 2: Frames 7-4 Assembly 3: Paper Feed 7-6 Assembly 4: Electronics 7-8 Assembly 5: Carrier 7-12 Assembly 6: Carrier Transport 7-14 Assembly
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 6
    table, symptom table, and service checks used to isolate failing field replaceable units (FRUs). 3. Diagnostic Aids contains tests and checks used to locate or repeat symptoms of printer problems. 4. Repair Information provides instructions for making printer adjustments and removing and installing
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 7
    et approuvé pour respecter les normes strictes de sécurité globale lors de l'utilisation de composants Lexmark spécifiques. Les caractéristiques de sécurité de certains éléments ne sont pas toujours évidentes. Lexmark ne peut être tenu responsable de l'utilisation d'autres pièces de rechange. • Les
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 8
    Funktionen der Bauteile und Optionen sind nicht immer offensichtlich. Sofern Teile eingesetzt werden, die nicht von Lexmark sind, wird von Lexmark keinerlei Verantwortung oder Haftung für dieses Produkt übernommen. • Die Wartungsinformationen für dieses Produkt sind ausschließlich für die Verwendung
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 9
    aprovado para satisfazer os padrões globais de segurança na utilização de componentes específicos da Lexmark. As funções de segurança de alguns dos componentes podem não ser sempre óbvias. A Lexmark não é responsável pela utilização de outros componentes de substituição. • As informações de seguran
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 10
    4092-001 x
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 11
    4092-001 1. General Information The Lexmark™ Color Jetprinter™ 7000 (4092-001) . printer is a personal, near laser-quality inkjet printer. The print cartridge contains single-unit customer-replaceable supply items. Dual printheads provide color and true black printing without changing printheads.
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 12
    information in this manual leads you to the correct field replaceable unit (FRU) or part. Use the error indicator charts, symptom index, service checks, and diagnostic aids to determine the symptom and repair the failure. Begin with "Start" on page 2-1. This printer can be serviced without being
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 13
    Supply Nonvolatile Random Access Memory Original Equipment Manufacturer Power-On Self Test Volts alternating current Volts direct current Zero Insertion Force Unique Tools Required For Service Parallel Wrap Plug P/N 1319128 General Information 1-3
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 14
    checks, and diagnostic aids to determine the failing part. Start Service error indications show as a series of flashes of the Power light. There is a pause between each series of flashes. If your printer has an error indication, locate the series of flashes in the "Error Indicator Table" on page
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 15
    the "Transport Service Check" on page 2-15. Check the carrier and/or replace the system board. Replace the printhead and/or printhead cable. Replace the code module and/or system board. Replace the Code Module and/or system board. Power-On Self Test (POST) Sequence When you turn the printer on it
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 16
    2-4, locate the symptom and take the indicated action. If your printer does not complete POST, locate the symptom in the following table Service Check" on page 2-11. Go to the "First Print Line Service Check" on page 2-6. Go to the "Paper Feed Service Check" on page 2-8. Go to the "Transport Service
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 17
    stops • Carrier slams side frame Communications Problems Action Go to the "Transport Service Check" on page 2-15. Symptom Printer not communicating with host computer Action Go to the "Parallel Port Service Check" on page 2-11. Maintenance Station Problems Symptom • Fails to cap the printhead
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 18
    printer, no Power light, no motors Print Quality Problems Action Go to the "Power Service Check" on page 2-11. Symptom • Voids in characters • Light print • Prints off the page • Fuzzy print • Carrier moves but does not print • Printhead drying prematurely • Vertical alignment off • Excessive ink
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 19
    have been turned to the envelope load positions. Be sure the envelope guides are against the envelopes. Perform the "Paper Feed Service Check" on page 2-8. First Print Line Service Check FRU 1 End-of-Forms Flag 2 End-of-Forms Sensor 3 System Board 4 Feed Arm Assembly Action Check the flag for
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 20
    4092-001 Maintenance Station Service Check The maintenance station has two functions: 1. Cleans the printhead nozzles during the print operation. 2. Seals the printhead when it is not being used to
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 21
    4092-001 Paper Feed Service Check If your printer does not have paper jam problems, continue with the service check. If your printer does have a paper jam problem, examine it for the following before you begin the service check: • Check the entire paper path for obstructions. • Be sure there is not
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 22
    , can be caused by: • An open or short in the motor • An open or short in the motor driver on the system board • A bind in the paper feed mechanism 3 Gears 4 Feed Arm Assembly 5 Paper Path , and worn or broken parts. Perform the "Paper Path Service Check" on page 2-10, starting at Step 1. 2-9
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 23
    4092-001 Paper Path Service Check Examine the printer for the following before you begin this service check: • Check the entire paper path for obstructions. • Be sure the paper guides are not worn or broken and are posi- tioned against the paper without binding or buckling the paper. • Be sure the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 24
    Check FRU 1 Parallel Port Action Run a test page to be sure the printer can print. Run the "Parallel Port Test" on page 3-5. If the test fails, replace the system board. Power Service Check FRU 1 Power Supply Action Disconnect J9 from the system board and check the following voltages on the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 25
    4092-001 Print Quality Service Check FRU 1 Print Cartridge 2 Printhead Carrier Assembly Action Be sure the printer contains good print cartridges. Reseat the printhead cables in the system board and check the following parts for wear or damage: • Print Cartridge Latch • Latch
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 26
    thermal sensor is not installed or malfunctioning, and the printer is operating in a warm environment > 104F (40C), excessive ink may flow from the cartridge. Be sure the thermal sensor maintenance station. Perform the "Maintenance Station Service Check" on page 2-7, then return to this check. 2-13
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 27
    7 Alignment Action Ink smudging and smearing can be caused by paper problems or problems in the paper problems in the transport area. Check the following: • Transport belt for wear and full engagement into the carrier grip. • Carrier guide is directed, through the Printer Control program, to perform
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 28
    to 8 V dc between J4-1 and ground as the printer goes through POST. 3 Carrier Guide Rod Clean the carrier rod. 4 Transport Belt Idler Pulley board. A problem with the maintenance station can cause carrier movement problems at the right margin. Go to the "Maintenance Station Service Check" on
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 29
    use: Procedure 1: • Press and hold the Paper Feed button while turning the printer on. Release the button when the printer completes POST. Procedure 2: • Turn the printer off. • Use a two pin jumper on connector J6. • Turn the printer on. The test begins when the Power Button is pressed. A two pin
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 30
    slot is empty. 3. Press and hold the Paper Feed button while turning the printer on and continue to hold until the Busy Light begins to flash. • Manually moving the carrier to the left causes the Power Light to flash. • Manually moving the carrier to the right, causes the Busy Light to remain on
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 31
    . The error log is especially helpful in diagnosing intermittent or difficult problems. To run the test: 1. Turn the printer off and place a two pin jumper on connector J6 as shown below. (Pins 3 & 4). 2. Place a sheet of paper in the manual feed far enough to activate the EOF (End of Forms) sensor
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 32
    the EOF sensor status in the following manner: • On - paper is in sensor • Off - paper is not in sensor To run the test: 1. Turn the printer off and place a two pin jumper on connector J6 as shown below. (Pins 3 & 4). 2. To start the test, press and hold the Paper Feed button while
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 33
    connector, before you start the test. To run the test: 1. Turn the printer off. 2. Attach the wrap plug to the parallel port. 3. Place a two pin jumper on pins (1 & 2) of test connector J6. 4. Turn the printer on. If the lights blink alternately, the test is failing. If the Busy
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 34
    4092-001 Print NVRAM Contents This test prints the contents of NVRAM in hexadecimal format. To run the test: 1. Turn the printer off and place a piece of paper in the manual feed far enough to activate the EOF sensor. 2. To start the test, press and hold the Paper Feed button while turning the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 35
    in good condition. Install a black print cartridge in the left side of the printhead cradle and a color print cartridge in the right side. To enter the test: 1. Turn the printer off. 2. Ensure the manual paper slot is empty. 3. To start the test, press and hold the Paper Feed button while turning
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 36
    (ESD). To prevent damage to ESD-sensitive parts, follow the instructions below in addition to all the usual precautions, such as turning the system ground point. This discharges any static electricity in your body to the printer. • Hold the ESD-sensitive part by its edge connector shroud (cover); do
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 37
    head and bidirectional alignment adjustments after replacing a print cartridge. Removal Procedures The following procedures are arranged according to the name of the printer part discussed. Unplug the power cord before removing any parts. Releasing Plastic Latches Many of the parts are held in place
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 38
    and pull forward and remove the maintenance station assembly. 5. Remove the two screws securing the carrier frame to the base cover. 6. Slide the printer off the base cover. Carrier Belt Removal 1. Remove the front cover. 2. Remove the printhead carrier assembly. 3. Push the idler pulley to the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 39
    4092-001 Carrier Frame Assembly Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the base assembly. 4. Disconnect the paper feed motor and power supply connectors from the system board. 5. Remove the four screws [A] securing the carrier frame to the left and right side frames
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 40
    arms. 2. Be sure the short extensions of the two paper flap springs are trapped under the carrier frame [C]. 3. Be sure the tab from the paper guide does not deflect the small feedroll shaft downward. The shaft should be forward of the tab. Carrier Transport Motor Removal 1. Remove the front cover
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 41
    board noting the position of the notch in the module. The notch is down. Edge Guide Asm and Paper Load Shaft Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the paper load door and manual insert tray. 4. Remove the pick roll hub, shaft and envelope bucklers. 5. Remove the two
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 42
    Exit Drive Belt Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the carrier frame assembly. 4. Remove the paper load door and manual insert tray. 5. Remove the small feed roll shaft. 6. Remove the two screws from the star roller assembly and remove the assembly. 7. Unlatch the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 43
    4092-001 Front Cover Removal 1. Place a screwdriver in slot [A] and release the cover latches. 2. Slide the cover forward and off the printer. To reassemble: 1. Slide the cover over the matching pieces on the bottom cover. 2. Press in both sides opposite the cover latches until they latch. Gutter
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 44
    4092-001 Inside Idler Gears Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the printer from the base assembly. 4. Remove the paper feed motor. 5. Gently pry the two idler gears from the left side frame. 4-9
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 45
    four mounting clips. Spread the right side frame and remove the large feed roll. Note: Install the compound idler gear and retainer clip after the printer is installed in the base assembly. Repair Information 4-10
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 46
    Remove the front cover. 2. Remove the rear cover. 3. Remove the paper load door and manual insert tray. 4. Remove the C-clip from the feed arm assembly and remove the feed arm large gear. Note: Gently pull the feed arm guide [A] on the left side frame forward, then remove the large gear. 4-11
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 47
    Left Side Frame Assembly Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the carrier frame assembly. 4. Remove the paper load door and manual insert tray. 5. Using a small screwdriver, pry open the slot in the retainer clip and remove it and the compound idler gear from the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 48
    assembly and slide the maintenance station assembly forward, out of the printer. Maintenance Wipers and Caps Removal 1. Remove the front cover. 2. down on their mounting posts. Be sure the wipers are completely seated. Manual Insert Tray Removal 1. Remove the front cover. 2. Remove the rear cover
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 49
    the base assembly. 4. Remove the two screws securing the paper feed motor and remove the motor. Note the routing of the motor cable. Paper Guide and EOF Flag Assembly Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the printhead carrier assembly. 4. Remove the carrier frame
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 50
    arms. 2. Be sure the short extensions of the two paper flap springs are trapped under the carrier frame [C]. 3. Be sure the tab from the paper guide does not deflect the small feedroll shaft downward. The shaft should be forward of the tab. 4-15
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 51
    Remove the rear cover. 3. Remove the paper load door and manual insert tray. 4. Slide the left paper guide to the right. 5. Remove the C-clip from the left paper guides and the rolls are centered on the pick pads. Power Supply Removal Note: When working on the printer, always unplug the printer from
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 52
    4092-001 Printhead Cable, Cradle & Paper Deflector Removal 1. Remove the front cover. 2. Remove the printhead carrier assembly. 3. Disconnect the printhead cable from the encoder card. Note the routing of the cable under the retaining clip on the carrier. 4. Separate the cradle from the printhead
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 53
    4092-001 Note: Be sure the cable is secured under the three retaining clips [B] on the back of the carrier. Repair Information 4-18
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 54
    cable connectors and disconnect the printhead cable from the system board. 3. Remove the screws from the ends of the carrier guide rod and move the carrier to the left. 4. Remove the carrier guide rod by lifting the right end of the rod while spreading the right side of the carrier frame. 5. Remove
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 55
    [A] and release the cover latches. 3. Slide the cover up and off the printer. 4. To reassemble, place the cover over the tabs in the bottom cover 3. Remove the carrier frame assembly. 4. Remove the paper load door and manual insert tray. 5. Remove the two screws securing the right side frame to the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 56
    : When replacing the system board, the head to head and bidirectional printing alignments will be reset to factory defaults. The user, through the Printer Control program, is directed to perform these alignments. When reinstalling the system board, it is easier to insert the printhead cables in the
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 57
    4092-001 5. Connector Locations System Board Connectors Connector Locations 5-1
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 58
    4092-001 Connector J1 J2 J3 J4 J5 J6 J7 J8 J9 SW1 SW2 S1 U20 Connector Names Printhead Cable 1 Printhead Cable 2 Printhead Cable 3 Transport Motor Paper Feed Motor Test Jumper Temperature Sensor Parallel Port Power Supply Paper Feed Switch Power Switch EOF Sensor Code Module 5-2
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 59
    4092-001 Encoder Card Connector Connector Locations 5-3
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 60
    the lubrication specifications. Follow these recommendations to prevent problems and maintain optimum performance. Lubrication Specifications Lubricate only frame engagement. • The carrier guide rod, and carrier guide rod bearings. • Both ends of the exit roller shaft. Preventive Maintenance 6-1
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 61
    4092-001 7. Parts Catalog How To Use This Parts Catalog • SIMILAR ASSEMBLIES: If two assemblies contain a majority of identical parts, they are broken down on the same list. Common parts are shown by one index number. Parts peculiar to one or the other of the assemblies are listed separately and
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 62
    4092-001 Assembly 1: Covers 7-2
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 63
    4092-001 AsmIndex 1 -1 1A 2 2 3 4 5 NS Part Number 13A1233 13A1234 13B0201 13B0202 69G4118 69G4119 13B0203 7347935 Units 1 1 1 1 1 1 1 1 Description Base Asm includes Feet, Gutter Pad Exit Tray and Extender Front Cover Asm, Access Cover with Door Latch, Buttons & LED Lens Front Access Cover with
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 64
    4092-001 Assembly 2: Frames 7-4
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 65
    4092-001 AsmIndex 2 -1 2 3 4 5 Part Number 13A1235 13B0272 13A1236 13B0204 13B0239 Units 1 1 1 1 4 Description Left Side Frame Sub-Asm without Gears Mid Frame Right Side Frame Carrier Frame Screw, Frame Mounting (PP) Parts Catalog 7-5
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 66
    4092-001 Assembly 3: Paper Feed 7-6
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 67
    8 9 10 11 12 Part Number 13B0205 13A1280 13B0212 70G0575 70G0576 13B0239 13B0271 69G4398 13B0239 13B0239 13B0239 13B0223 70G0579 Units 1 1 1 1 1 1 1 1 1 3 2 1 1 Description Paper Guide Asm includes EOF Flag, Spring Small Feed Roll Shaft Roll B/M and Paper Flap Star Roller Asm Large Feed Roll Asm
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 68
    4092-001 Assembly 4: Electronics 7-8
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 69
    4092-001 AsmIndex 4 -1 2 3 Part Number 13B0213 13B0214 1339526 1342514 1339520 1339520 1342514 1342514 1342534 1339526 1342534 1342514 1342514 1339525 1342514 1339519 1342514 1339520 1339520 1339520 1342514 1342514 1339521 1339524 70G0496 1342514 1339520 1342514 1339520 1342514 1342536 1342514
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 70
    4092-001 Assembly 4: Electronics (continued) 7-10
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 71
    4092-001 AsmIndex 4 -4 5 6 7 NS Part Number 13B0226 13B0239 13B0045 13B0239 13B0239 Units 1 5 1 1 1 Description Code Module Screw, System Board Mounting, Frame Mounting (PP) Thermal Sensor Board w/ Cable Screw, Thermal Sensor Mounting (PP) Jumper, 2-Pin (PP) Parts Catalog 7-11
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 72
    4092-001 Assembly 5: Carrier 7-12
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 73
    7 8 Part Number 13B0237 13B0222 13B0238 13B0217 69G4156 13B0239 13B0221 13B0239 Units 1 1 1 1 1 1 1 2 Description Printhead Carrier B/M Printhead Cable (Folded) Rubber Backer Carrier Guide Rod Encoder Card Asm Screw, Encoder Card Mounting (PP) Printhead Cartridge Interlock Key B/M Screw, Carrier
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 74
    4092-001 Assembly 6: Carrier Transport 7-14
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 75
    4092-001 AsmIndex 6 -1 2 3 4 5 6 Part Number 13B0219 13B0215 69G4403 69G4163 13B0239 13B0239 Units 1 1 1 1 2 1 Description Carrier Transport Motor & Pulley Carrier Belt Encoder Strip Idler Pulley Tension Asm Screw, Carrier Transport Motor Mounting (PP) Tensioner, Encoder Strip (PP) Parts
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 76
    4092-001 Assembly 7: Sheet Feeder 7-16
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 77
    Width Adjust Strip Left Edge Guide Upper Paper Support Pick Roll & Paper Load Shaft B/M Pick Roll Hub Asm Envelope Buckler B/M, Left & Right Back Plate Paper Load Door Asm Manual Insert Tray E-Ring (PP) Screw, Side Frame (PP) Spring, Left Paper Load (PP) Spring, Right Paper Load (PP) Parts Catalog
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 78
    4092-001 Assembly 8: Maintenance Station 7-18
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 79
    4092-001 AsmIndex 8 -1 2 3 Part number 13B0160 70G0590 13B0239 Units 1 1 2 Description Maintenance Station Asm Wiper and Cap B/M (one of each) Screw, Maintenance Station Mounting (PP) Parts Catalog 7-19
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 80
    Power Consumption 1-2 Preventive Maintenance 6-1 Problems Carrier Transport 2-4 Communications 2-4 Maintenance Carrier Frame 4-4 Carrier Transport Motor 4-5 Code Module 4-6 Edge Guide Asm 4-6 Encoder Card 4-6 Encoder Strip 4-6 Envelope Bucklers 4-16 Manual Insert Tray 4-13 Mid Frame Assembly 4-13 X-1
  • Lexmark 7000 Color Jetprinter | Service Manual - Page 81
    Deflector 4-17 Paper Feed Motor 4-14 Paper Flap 4-21 Paper Guide 4-14 Paper Load Door 4-16 Paper Load Shaft 4-6 Pick Small Feed Rollers 4-21 Star Roller 4-21 System Board 4-21 Repair Information 4-1 S Service Checks Envelope Feed 2-6 First Print Line 2-6 Maintenance Station 2-7 Paper Feed 2-8 Paper
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
4092-001
Color Jetprinter™ 7000
Lexmark is a trademark of Lexmark
International, Inc., registered in the
United States and/or other countries.
Color Jetprinter is a trademark of
Lexmark International, Inc.
• Table of Contents
• Index
• Safety and Notices
• Trademarks
• Start Diagnostics
• Main Menu