Lexmark 7000 Color Jetprinter Service Manual - Page 52
Printhead Cable, Cradle & Paper Deflector Removal, pushing out the cradle latches
View all Lexmark 7000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4092-001 Printhead Cable, Cradle & Paper Deflector Removal 1. Remove the front cover. 2. Remove the printhead carrier assembly. 3. Disconnect the printhead cable from the encoder card. Note the routing of the cable under the retaining clip on the carrier. 4. Separate the cradle from the printhead carrier assembly by pushing out the cradle latches [A]. 5. Feed the folded end of the printhead cable through the opening in the carrier assembly and remove the cable. Note: Use the illustration to assemble the carrier parts in the correct sequence. 4-17
4-17
4092-001
Printhead Cable, Cradle & Paper Deflector Removal
1.
Remove the front cover.
2.
Remove the printhead carrier assembly.
3.
Disconnect the printhead cable from the encoder card. Note the
routing of the cable under the retaining clip on the carrier.
4.
Separate the cradle from the printhead carrier assembly by
pushing out the cradle latches [
A
].
5.
Feed the folded end of the printhead cable through the opening
in the carrier assembly and remove the cable.
Note:
Use the illustration to assemble the carrier parts in the correct
sequence.