Lexmark 7000 Color Jetprinter Service Manual - Page 46
Large Outside Gear Removal, Pull the pick roll shaft out far enough to remove the large gear.
View all Lexmark 7000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4092-001 Large Outside Gear Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the paper load door and manual insert tray. 4. Remove the C-clip from the feed arm assembly and remove the feed arm assembly. 5. Remove the C-clip from the left side of the pick roll shaft. 6. Pull the pick roll shaft out far enough to remove the large gear. Note: Gently pull the feed arm guide [A] on the left side frame forward, then remove the large gear. 4-11
4-11
4092-001
Large Outside Gear Removal
1.
Remove the front cover.
2.
Remove the rear cover.
3.
Remove the paper load door and manual insert tray.
4.
Remove the C-clip from the feed arm assembly and remove the
feed arm assembly.
5.
Remove the C-clip from the left side of the pick roll shaft.
6.
Pull the pick roll shaft out far enough to remove the large gear.
Note:
Gently pull the feed arm guide [
A
] on the left side frame
forward, then remove the large gear.