Lexmark 7000 Color Jetprinter Service Manual - Page 32

End of Forms (EOF) Test, as shown below. Pins 3 & 4.

Get Lexmark 7000 Color Jetprinter PDF manuals and user guides View all Lexmark 7000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

4092-001 End of Forms (EOF) Test This test checks the EOF sensor on the system board. During the test, the power light blinks rapidly. The Busy Light shows the EOF sensor status in the following manner: • On - paper is in sensor • Off - paper is not in sensor To run the test: 1. Turn the printer off and place a two pin jumper on connector J6 as shown below. (Pins 3 & 4). 2. To start the test, press and hold the Paper Feed button while turning the printer on. Hold the button until the Power Light blinks rapidly. Turn power off or unplug the printer to stop the test. 3-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
3-4
4092-001
End of Forms (EOF) Test
This test checks the EOF sensor on the system board.
During the test, the power light blinks rapidly. The Busy Light shows
the EOF sensor status in the following manner:
•
On - paper is in sensor
•
Off - paper is not in sensor
To run the test:
1.
Turn the printer off and place a two pin jumper on connector J6
as shown below. (Pins 3 & 4).
2.
To start the test, press and hold the Paper Feed button while
turning the printer on. Hold the button until the Power Light
blinks rapidly. Turn power off or unplug the printer to stop the
test.