Lexmark C720 User's Guide - Page 282
Removing an interface card, Remove the two screws securing the interface card to the rear cover.
View all Lexmark C720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Removing an interface card You need a number 2 Phillips screwdriver to remove an interface card. 1 Make sure the printer is turned off and the power cord is unplugged. 2 Complete the steps for Removing the rear cover and system board if the rear cover and system board are still installed. WARNING: Interface cards are easily damaged by static electricity. Touch something metal before you touch an interface card. 3 Remove the two screws securing the interface card to the rear cover. Screws 4 Gently pull the interface card completely out of the connector. 5 Place the interface card in its original packaging. If you do not have the original packaging, wrap the interface card in paper and store it in a box. 282
282
Removing an interface card
You need a number 2 Phillips screwdriver to remove an interface card.
1
Make sure the printer is turned off and the power cord is unplugged.
2
Complete the steps for
Removing the rear cover and system board
if the rear cover and
system board are still installed.
W
ARNING
:
Interface cards are easily damaged by static electricity. Touch something metal
before you touch an interface card.
3
Remove the two screws securing the interface card to the rear cover.
4
Gently pull the interface card completely out of the connector.
5
Place the interface card in its original packaging.
If you do not have the original packaging, wrap the interface card in paper and store it in a box.
Screws