Lexmark C720 User's Guide - Page 95
Transfer the oil bottle and cleaner roll, Align the oil bottle with the slots in the new fuser.
View all Lexmark C720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Transfer the oil bottle and cleaner roll 1 Rotate the left and right green oil bottle locking levers on the old fuser to unlock the oil bottle and cleaning roll. 2 Lift the oil bottle from the old fuser. Note: Oil may drop from the bottom of the oil bottle. You can place a piece of paper under the bottle after you lift it to prevent oil from dropping on the printer, floor, or your clothing. 3 Align the oil bottle with the slots in the new fuser. 4 Lower the oil bottle into the fuser. WARNING: It takes approximately 30 minutes for the oil to reach the fuser after initial oil bottle installation. Make sure the oil bottle has been installed for at least 30 minutes 95
95
Transfer the oil bottle and cleaner roll
1
Rotate the left and right green oil bottle locking levers on the old fuser to unlock the oil bottle
and cleaning roll.
2
Lift the oil bottle from the old fuser.
Note:
Oil may drop from the bottom of the oil bottle. You can place a piece of paper under
the bottle after you lift it to prevent oil from dropping on the printer, floor, or your
clothing.
3
Align the oil bottle with the slots in the new fuser.
4
Lower the oil bottle into the fuser.
W
ARNING
:
It takes approximately 30 minutes for the oil to reach the fuser after initial oil bottle
installation. Make sure the oil bottle has been installed for at least 30 minutes