Lexmark CS317 User Guide - Page 134

Troubleshooting 134 Printer had to restart. Last job may be incomplete. From the printer control panel, press to clear the message and continue printing. For more information, go to http://support.lexmark.com or contact customer support. Rear USB port disabled [56] Try one or more of the following: • From the printer control panel, press to clear the message and continue printing. Note: The printer discards any data received through the USB port. • From the printer control panel, set USB Buffer to Auto. Reinstall missing or unresponsive [color] cartridge [31.xy] Try one or more of the following: • Install the missing toner cartridge. For more information, see the "Replacing supplies" section of the User's Guide. • Remove the unresponsive cartridge, and then reinstall it. Note: If the message appears after reinstalling the supply, then the cartridge may be defective. Replace the cartridge. Reinstall missing or unresponsive black and color imaging kit and all cartridges [31.xy] Try one or more of the following: • Check if the imaging kit is missing. If missing, then install the imaging kit. For information on installing the imaging kit, see the "Replacing supplies" section. • If the imaging kit is installed, then remove and reinstall the unresponsive imaging kit. Note: If the message appears after reinstalling the supply, then replace the imaging kit. The imaging kit may be defective or a non‑genuine Lexmark supply. For more information, see "Using genuine Lexmark parts and supplies" on page 96. Reload printed pages in Tray [x] Try any of the following: • From the printer control panel, press of the sheet. • From the printer control panel, press to clear the message and continue printing the second side to cancel the print job.