Lexmark CS317 User Guide - Page 136

Troubleshooting 136 Replace unsupported [type] imaging kit [32.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. Remove the indicated imaging kit, and then install a supported one to clear the message. Note: If you do not have a replacement imaging kit, then see the "Ordering supplies" section of the User's Guide or visit www.lexmark.com. Replace waste toner bottle [82.xy] Replace the waste toner bottle to clear the message. Supply needed to complete job A supply needed to complete the job is missing. Cancel the current job. Too many trays. Remove some. [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra trays. 4 Connect the power cord to the electrical outlet. 5 Turn the printer back on. [Type] imaging kit low [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. You may need to replace the imaging kit. If necessary, press message and continue printing. on the printer control panel to clear the [Type] imaging kit nearly low [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. If necessary, press on the printer control panel to clear the message and continue printing. [Type] imaging kit very low, [x] estimated pages remain [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. You may need to replace the imaging kit very soon. For more information, see the "Replacing supplies" section of the User's Guide. If necessary, press on the printer control panel to clear the message and continue printing.