Lexmark CS317 User Guide - Page 90
Using Hibernate mode, Setting Hibernate Timeout, Notes, Settings, General Settings, Timeouts, Submit
View all Lexmark CS317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Saving money and the environment 90 Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Timeouts. 3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode. 4 Click Submit. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > General Settings > > Timeouts > > Sleep Mode > 2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode. 3 Press . Using Hibernate mode Hibernate is an ultra‑low‑power saving mode. Notes: • Three days is the default amount of time before the printer enters Hibernate mode. • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled. 1 From the control panel, navigate to: > Settings > > General Settings > 2 Press Press Sleep Button or Press and Hold Sleep Button, and then press . 3 Press Hibernate > . Setting Hibernate Timeout Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field.