Lexmark MS517 Embedded Web Server--Security: Administrator s Guide - Page 47
Using the control panel, Restore Factory Defaults, Erase Printer Memory
View all Lexmark MS517 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Securing data 47 Using the control panel 1 Turn off the printer. 2 While the printer is turning on, press and hold 2 and 6 on the keypad simultaneously until a progress bar appears. Note: Some printer models require you to press and hold the check mark and the right arrow buttons. The printer performs a power‑on sequence, and then the Configuration menu appears. 3 From the list, select Restore Factory Defaults > Erase Printer Memory. While clearing the settings, the "Restoring Factory Defaults" message appears on the display, and then the device reboots to the initial setup wizard screen. Turn off the device to restore factory settings completely. This feature erases all device settings stored in NVRAM, including network, security, and application settings, and all pending jobs. Installed applications and settings are also removed. If there is no hard disk installed, then pending fax data are also removed.