Lexmark MX317 User Guide - Page 225

Troubleshooting 225 Fax function is not set up Before completing these instructions for network printers, check if the fax cables are connected. Note: The indicator light blinks red until you set up fax. Action Yes No a From the printer control panel, navigate to: > Settings > > General Settings > The problem is solved. > Run initial Contact customer support. setup > > b Turn off the printer, and then turn it back on. The "Select your language" screen appears on the printer display. c Select a language, and then press . d Select a country or region, and then press . e Select a time zone, and then press . f Press the up or down arrow button to scroll to Fax, and then press . Is the fax function set up? Caller ID is not shown Action Yes Contact your telephone company to check if your telephone line The problem is is subscribed to the caller ID service. solved. Notes: • If your region supports multiple caller ID patterns, then you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2). • The availability of these settings in the Fax menu depends on whether your country or region supports multiple caller ID patterns. • Contact your telephone company to determine which pattern or switch setting to use. Does the caller ID appear? No Contact customer support.