Lexmark MX317 User Guide - Page 82
Setting the outgoing fax or station name and number, Setting the date and time
View all Lexmark MX317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Faxing 82 Setting the outgoing fax or station name and number 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Fax Settings > Analog Fax Setup. 3 From the Fax Settings menu, type the name to be printed on all outgoing faxes in the Fax Name or Station Name field. 4 In the Fax Number or Station Number field, enter the printer fax number. 5 Click Submit. Setting the date and time You can set the date and time so that they are printed on every fax you send. If there is a power failure, then you may have to reset the date and time. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Other Settings area > Security > Set Date and Time. 3 In the Set Date & Time field, enter the current date and time. 4 Click Submit. Note: We recommend using the network time. Configuring the printer to observe daylight saving time Set the printer to automatically adjust for daylight saving time. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Security > Set Date and Time. 3 Select the Automatically Observe DST check box, and then enter the DST start and end dates in the Custom Time Zone Setup section. 4 Click Submit.