Lexmark MX410 User's Guide - Page 175

Understanding the printer menus 175 Use Rings to Answer 1-25 Auto Reduction On Off Paper Source Auto Tray [x] Multi‑Purpose Feeder Manual Feeder Sides (Duplex) Off On To Specify the number of rings before answering an incoming fax job. Note: 3 is the factory default setting. Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source. Note: On is the factory default setting. Specify the paper source for printing incoming fax jobs. Note: Auto is the factory default setting. Enable two‑sided (duplex) printing for incoming fax jobs. Notes: • Off is the factory default setting. • This menu item appears only when a print duplexer is installed. Enable the printer to include separator sheets for incoming fax jobs. Note: Off is the factory default setting. Separator Sheets Off Before Job After Job Separator Sheet Source Tray [x] Manual Feeder Fax Footer On Off Max Speed 2400 4800 9600 14400 33600 Fax Forwarding Print Print and Forward Forward Forward to Fax E‑mail FTP LDSS eSF Specify where the printer will pick the separator sheet. Note: Tray 1 is the factory default setting. Print the transmission information at the bottom of each page from a received fax. Note: Off is the factory default setting. Specify the maximum speed in baud at which faxes are received. Note: 33600 is the factory default setting. Enable forwarding of received faxes to another recipient. Note: Print is the factory default setting. Specify the type of recipient to which faxes will be forwarded. Notes: • Fax is the factory default setting. • This menu item is available only from the Embedded Web Server.