Lexmark MX410 User's Guide - Page 297
Lexmark MX410 Manual
View all Lexmark MX410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
Troubleshooting 297 "Scanning takes too long or freezes the computer" on page 299 "Poor scanned image quality" on page 299 "Partial document or photo scans" on page 300 "Cannot scan from a computer" on page 301 The scanner does not respond Action Step 1 Check if the printer is turned on. Is the printer turned on? Step 2 Check if the printer cable is securely attached to the printer and the computer, print server, option, or other network device. Is the printer cable securely attached to the printer and the computer, print server, option, or other network device? Step 3 Check if the power cord is plugged into the printer and a properly grounded electrical outlet. Is the power cord plugged into the printer and a properly grounded electrical outlet? Step 4 Check if the electrical outlet is turned off by a switch or breaker. Is the electrical outlet turned off by a switch or breaker? Connect the printer Check if the printer is plugged into any surge protectors, uninterruptible power cord directly to a properly grounded power supplies, or extension cords. electrical outlet. Step 5 Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords? Step 6 Check other electrical equipment plugged into the outlet. Are the other electrical equipment working? Unplug the other Go to step 7. electrical equipment and turn on the printer. If the printer does not work, then reconnect the other electrical equipment and then go to step 6. Go to step 6. Turn on the switch or reset the breaker. Go to step 5. Go to step 4. Go to step 3. Connect the printer cable securely to the printer and the computer, print server, option, or other network device. Connect the power cord to the printer and a properly grounded electrical outlet. Yes Go to step 2. No Turn on the printer.