Lexmark MX410 User's Guide - Page 229

Clearing jams 229 Notes: • When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages. • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not guarantee that the page will reprint. Jam access area 1 2 3 4 5 Printer control panel message What to do Remove all paper from the ADF tray, and then remove the jammed paper. Remove the jammed paper. Open the front door, then remove the toner cartridge and imaging unit, and then the jammed paper. Remove all paper from the multipurpose feeder, and then remove the jammed paper. Pull out tray 1 completely, then push the front duplex flap down, and then remove the jammed paper. Note: You may need to open the rear door to clear some 23y.xx paper jams. Automatic document [x]‑page jam, open automatic feeder (ADF) feeder top cover. [28y.xx] Standard bin Front door [x]‑page jam, clear standard bin. [20y.xx] [x]‑page jam, open front door. [20y.xx] Multipurpose feeder [x]‑page jam, clear manual feeder. [250.xx] Tray 1 [x]‑page jam, remove tray 1 to clear duplex. [23y.xx] 6 7 Tray [x] Rear door [x]‑page jam, remove tray [x]. [24y.xx] [x]‑page jam, open rear door. [20y.xx] Pull out the indicated tray, and then remove the jammed paper. Open the rear door, and then remove the jammed paper.