Lexmark MX410 User's Guide - Page 249
Lexmark MX410 Manual
View all Lexmark MX410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Troubleshooting 249 Not enough free space in flash memory for resources [52] Try one or more of the following: • From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. • Delete fonts, macros, and other data stored in the flash memory. • Upgrade to a larger capacity flash memory card. Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted. Printer had to restart. Last job may be incomplete. From the printer control panel, touch models, press to confirm. to clear the message and continue printing. For non‑touch‑screen printer For more information, visit http://support.lexmark.com or contact customer support. Reinstall defective or unresponsive cartridge [31.xy] Remove and reinstall the toner cartridge. For more information, see the instruction sheet that came with the supply. Reinstall missing or unresponsive cartridge [31.xy] Try one or more of the following: • Check if the toner cartridge is missing. If missing, install the toner cartridge. For information on installing the cartridge, see the "Replacing supplies" section of the User's Guide. • If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it. Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner cartridge. Remove paper from standard output bin Remove the paper stack from the standard bin. The printer automatically detects paper removal and resumes printing. If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touchscreen printer models, press to confirm. Replace all originals if restarting job. From the printer control panel, try one or more of the following: • Select Cancel job to clear the message and cancel the scan job. • Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job. • Select Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.