Lexmark MX510 User's Guide - Page 156

Understanding the printer menus 156 Security Audit Log menu Use Export Log To Let an authorized user export the audit log. Notes: • To export the audit log from the printer control panel, a flash drive must be attached to the printer. • The audit log can be downloaded from the Embedded Web Server and saved on a computer. Delete Log Yes No Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0-23 Severity of events to log 0-7 Specify whether or not audit logs are deleted. Note: Yes is the factory default setting. Specify how and whether or not audit logs are created. Notes: • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting. • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting. • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting. • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting. Set Date and Time menu Use Current Date and Time Manually Set Date and Time [input date/time] To View the current date and time settings for the printer. Enter the date and time. Notes: • Manually setting the date and time sets Enable NTP to No. • The wizard lets you set the date and time in YYYY‑MM‑DD‑HH:MM format. Time Zone [list of time zones] Automatically observe DST On Off Enable NTP On Off Select the time zone. Note: GMT is the factory default settings. Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting. Note: On is the factory default setting. Enable Network Time Protocol, which synchronizes the clocks of devices on a network. Notes: • On is the factory default setting. • This setting is turned off if you manually set the date and time.