Lexmark MX510 User's Guide - Page 54
Lexmark MX510 Manual
View all Lexmark MX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Additional printer setup 54 Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click , or click Start and then click Run. 3 In the Start Search or Run dialog, type control printers. 4 Press Enter, or click OK. 5 Select the printer that has changed. Note: If there is more than one copy of the printer, then update all of them with the new IP address. 6 Right‑click the printer, and then select Printer properties (Windows 7) or Properties (earlier versions). 7 Click the Ports tab. 8 Select the port from the list, and then click Configure Port. 9 Type the new IP address in the "Printer Name or IP Address" field. 10 Click OK > Close. For Macintosh users 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following: - System Preferences > Print & Scan - System Preferences > Print & Fax b Click +. c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing: Notes: - Make sure AppleTalk is activated on your printer. - This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to: System Preferences > Print & Fax b Click +, and then navigate to: AppleTalk > select the printer > Add