Lexmark MX510 User's Guide - Page 162
Lexmark MX510 Manual
View all Lexmark MX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Understanding the printer menus 162 Use Allow Background Removal On Off Allow Custom Job Scans On Off Scanner Jam recovery Job Level page Level Web Page Refresh Rate 30-300 Contact Name To Specify whether image background removal is allowed in copy, fax, e‑mail, FTP, or scan‑to‑flash‑drive jobs. Note: On is the factory default setting. The background of the image will be removed. Scan multiple jobs to one file. Note: On is the factory default setting. If On is selected, then Allow Custom Job Scans can be enabled for specific jobs. Specify how a scan job should be reloaded if a paper jam occurs in the ADF. Note: Job Level is the factory default setting. Specify the number of seconds between Embedded Web Server refreshes. Note: 120 is the factory default setting. Specify a contact name for the printer. Note: The contact name will be stored on the Embedded Web Server. Location Alarms Alarm Control Cartridge Alarm Specify the location of the printer. Note: The location will be stored on the Embedded Web Server. Set an alarm to sound when the printer requires user intervention. When activated, Alarm Control lets you set the number of times that the alarm sounds, while Cartridge Alarm lets you stop printing when a cartridge-low condition occurs. For each alarm type, select from the following options: Off Single Continuous Notes: • Single is the factory default setting for Alarm Control. This sounds three quick beeps. • Off is the factory default setting for Cartridge Alarm. This means no alarm will sound. • Continuous repeats three beeps every 10 seconds. Timeouts Standby Mode Disabled 1-240 Specify the number of minutes of inactivity before the printer enters a lower power state. Note: 15 is the factory default setting.