Lexmark MX510 User's Guide - Page 163

Understanding the printer menus 163 Use Timeouts Sleep Mode Disabled 1-120 To Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state. Notes: • 30 is the factory default setting. • Disabled appears only when Energy Conserve is set to Off. • Lower settings conserve more energy, but may require longer warm‑up times. • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm‑up time. Timeouts Timeout Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Hibernate Timeout on Connection Hibernate Do Not Hibernate Set the amount of time the printer waits before it goes to Hibernate mode. Notes: • Disabled is the factory default setting for printers except in European Union countries and Switzerland. • "3 days" is the factory default setting for Class B printers in European Union countries and Switzerland. Set the printer to hibernate mode even when there is an active Ethernet or fax connection. Notes: • Do Not Hibernate is the factory default setting. • The fax function is available only in select printer models. Timeouts Screen Timeout 15-300 Timeouts Prolong Screen Timeout On Off Set the amount of time in seconds the printer waits before returning the display to the Ready state. Note: 30 is the factory default setting. Show a message that lets you reset the screen timeout timer instead of returning to the home screen. Note: Off is the factory default setting.