Lexmark Network Printer Device N8050 User Guide - Page 13
Configuring the authentication mechanism, Con Authentication, WPA Personal
View all Lexmark Network Printer Device manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
5 Select the appropriate encryption for the network. The type of encryption that can be used is dependent on the authentication type that was selected in step 4. For Open: • No Encryption • WEP For Shared: • WEP For WPA Personal: • TKIP For 802.1x-RADIUS: • No Encryption • WEP (dynamic keys) • WEP (static keys) • WPA-TKIP 6 If 802.1x-RADIUS using EAP-TLS is the intended authentication type, a certificate request is needed to obtain a signed certificate for the device. For instructions on requesting a new signed certificate, see Creating a certificate request. If a different 802.1x-RADIUS authentication mechanism is used, skip to step 7. 7 Configure authentication and encryption. If none of the following options are selected, continue to step 8. If 802.1x-RADIUS was selected as the authentication type, click Configure Authentication, and follow the Configuring the authentication mechanism instructions. If WPA Personal was selected as the encryption type, click Configure Encryption, and follow the Configuring WPA Personal encryption instructions. If WEP or WEP (static keys) was selected as the encryption type, click Configure Encryption, and follow the Configuring WEP encryption instructions. 8 Click Apply. 9 Click OK. 10 Click OK to close the utility. Configuring the authentication mechanism • If EAP-MD5, MSCHAPv2, or LEAP is selected as the authentication mechanism: 1 Enter an appropriate username and password for the 802.1x-RADIUS authentication server. 2 Confirm the password. Using the Wireless Setup Utility 9