Lexmark Network Printer Device N8050 User Guide - Page 23

9 Under Network/Ports, click Wireless. 10 Change the listed network settings to match the wireless network that the printer will be used on, including: • SSID • BSS type • Channel Number (Ad-Hoc only) • Wireless Security Mode • Encryption Mode (If applicable) The SSID must be entered exactly as it is used on the network. SSIDs are case-sensitive, so if the SSID is entered incorrectly, the print server will not be able to communicate on the network, and the configuration process must be repeated. Note: If WEP is selected as the security mode, click Advanced Settings for the option to enter additional WEP security keys. 11 Click Submit. 12 Restore the computer's wireless network settings back to the original values that were recorded in step 3. Certificate management Some authentication mechanisms associated with the 802.1x-RADIUS Wireless Security mode require the use of either a CA Certificate (PEAP and EAP-TTLS), or both a Signed Certificate and a CA Certificate (EAP-TLS). To manage certificates for use with 802.1x-RADIUS 1 From the print server embedded Web page, click Configuration on the left side of the page. 2 Click Certificate Management. 3 Complete the appropriate management option(s). 4 Return to the embedded Web page home screen and go to step 7 of the Configuring the print server in Ad-Hoc mode instructions. To install a new CA Certificate 1 Under Certificate Configuration, click Install A New Certificate Authority Certificate. 2 Browse to the correct certificate location, and click Submit. Configuring the print server in Ad-Hoc mode 19