Lexmark W840 Menus and Messages - Page 36
Using printer menus, NetWare, Sets the Packet Burst value On or Off.
View all Lexmark W840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using printer menus Menu selection Parity Honor DSR Purpose Values Sets the parity for serial input and output Even data frames. Odd None* Ignore Determines whether the printer uses the Off* Data Set Ready (DSR) signal. DSR is one of the handshaking signals for most serial interface cables. On The serial interface uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. This electrical noise can cause stray characters to print. Select On to prevent stray characters from printing. All data received by the serial port is treated as valid data. Only data received while the DSR signal is high is treated as valid. NetWare Use this menu selection to view or change the printer NetWare settings. Menu selection View Login Name View Print Mode View Network Number Activate Ethernet 802.2 Ethernet 802.3 Ethernet Type II Ethernet SNAP Packet Burst NSQ/GSQ Mode Purpose Values Displays the assigned NetWare login name. Selecting View Login Name displays the NetWare name on the operator panel. Displays the assigned NetWare print mode. Selecting View Print Mode displays the NetWare print mode on the operator panel. Displays the assigned NetWare number. Selecting View Network Number displays the NetWare network number on the operator panel. Activates or deactivates the NetWare On feature. Off On-Activates the NetWare feature. Off-Deactivates the NetWare feature. Sets the Ethernet 802.2 value On or Off. On* Off Sets the Ethernet 802.3 value On or Off. On* Off Sets the Ethernet Type II value On or On* Off. Off Sets the Ethernet SNAP value On or Off. On* Off Sets the Packet Burst value On or Off. On Off * Sets the NSQ/GSQ Mode value On or Off. On Off * 36