Lexmark W840 Menus and Messages - Page 44

Understanding printer messages Message USB drive removed View supplies Waiting 1565 Emul Error Load Emul Option 31 Replace defective or missing toner cartridge 34 Incorrect media, check guides 35 Insufficient memory to support Resource Save feature 37 Insufficient memory to collate job 37 Insufficient memory for Flash Memory Defragment operation 37 Insufficient memory, some held jobs were lost 38 Memory Full 39 Page is too complex to print Action • Wait for the message to clear. • Insert the USB drive. Displays the current level of all printer supplies. The printer has received a page of data to print, but is waiting for an End of Job command, a Form Feed command, or additional data. • Press to print the contents of the buffer. • Cancel the current job. The printer automatically clears the message in 30 seconds, and then disables the download emulator on the firmware card. Download the correct download emulator version from the Lexmark Web site. Insert or replace the toner cartridge. • Load the appropriate media in the selected source. • To clear the message and print the job using a different paper source, press until Continue appears, and then press . • To disable Resource Save and continue printing, press appears, and then press . until Continue • To enable Resource Save after you get this message: - Make sure the link buffers are set to Auto, then exit the menus to activate the link buffer changes. - When Ready is displayed, enable Resource Save. • Install additional memory. • To print the portion of the job already stored and begin collating the rest of the job, press until Continue appears, and then press . • Cancel the current job. • To stop the defragment operation and continue printing, press appears, and then press . • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. until Continue The printer was unable to restore some or all of the confidential or held jobs on the hard disk. To clear the message, press until Continue appears, and then press . • To clear the message and continue printing, press and then press . The job may not print correctly. • Cancel the current job. • Install additional printer memory. until Continue appears, • To clear the message and continue printing, press and then press . The job may not print correctly. • Cancel the current job. • Install additional printer memory. until Continue appears, 44