Lexmark X203n User's Guide - Page 160
Streaked vertical lines, Toner fog or background shading appears on the Warning-Potential Damage
View all Lexmark X203n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
THERE MAY BE EXCESS TONER IN THE PAPER PATH Clean the toner from the paper path. If the problem persists, contact Customer Support. Streaked vertical lines ABCDE ABCDE ABCDE These are possible solutions. Try one or more of the following: THE TONER MAY SMEAR WHEN PAPER IS FED FROM A SPECIFIC SOURCE From Print Properties, the Print dialog, or the printer control panel, select another paper source for the job. THE TONER CARTRIDGE IS DEFECTIVE Replace the toner cartridge. MAKE SURE THE PAPER PATH IS CLEAR Paper could be caught between the photoconductor kit and the fuser. Check the paper path around the fuser area. Warning-Potential Damage: Do not touch the photoconductor on the underside of the photoconductor kit. Use the cartridge handle whenever you are holding the cartridge. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. Clear any paper you see. THERE MAY BE EXCESS TONER IN THE PAPER PATH Clean the toner from the paper path. Contact Customer Support. Toner fog or background shading appears on the page These are possible solutions. Try one or more of the following: THE TONER CARTRIDGE MAY BE DEFECTIVE Replace the toner cartridge. THERE IS TONER IN THE PAPER PATH Contact Customer Support. Troubleshooting 160