Lexmark X3330 Service Manual - Page 20

Catastrophic errors, is on and operating. An error message appears on the LCD. - cartridge

Get Lexmark X3330 PDF manuals and user guides View all Lexmark X3330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

4479-XXX Code 0302 Name Hardware Failure 0303 ROM Checksum Failure Description General hardware failure (unable to localize failure to a specific system) Corrupted ROM Action Replace the system board. Replace the system board. Catastrophic errors In this state, the All-In-One is in an error mode such that operation cannot continue. These errors affect the entire All-In-One. The LCD is on and operating. An error message appears on the LCD. The power LED blinks continuously and all button presses are ignored except for the power button which resets the machine. The All-InOne accepts data, but discards it and does not respond. Code 1202 Name Data Error Description Incorrect data has been sent from the host computer to the All-In-One. 1204 Printhead Programming Unable to program pseudo-random printhead ID Action Unplug the All-In-One; wait a few seconds, then plug the All-In-One back in and turn the power on. If the error remains, replace the USB cable. If the error continues, replace the system board. Replace print cartridge(s). 2-2 Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
4479-XXX
2-2
Service Manual
Catastrophic errors
In this state, the All-In-One is in an error mode such that operation
cannot continue. These errors affect the entire All-In-One. The LCD
is on and operating. An error message appears on the LCD. The
power LED blinks continuously and all button presses are ignored
except for the power button which resets the machine. The All-In-
One accepts data, but discards it and does not respond.
0302
Hardware
Failure
General hardware
failure (unable to
localize failure to a
specific system)
Replace the system
board.
0303
ROM
Checksum
Failure
Corrupted ROM
Replace the system
board.
Code
Name
Description
Action
1202
Data Error
Incorrect data has
been sent from the
host computer to the
All-In-One.
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
replace the USB
cable. If the error
continues, replace the
system board.
1204
Printhead
Programming
Unable to program
pseudo-random
printhead ID
Replace print
cartridge(s).
Code
Name
Description
Action