Lexmark X3330 Service Manual - Page 26
User intervention errors, Description, Action, Arrow, Cancel - ink cartridges
View all Lexmark X3330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4479-XXX User intervention errors Code 1100 1101 1102 1103 1104 1105 1200 1201 1203 1204 Name Paper Jam Paper Out Incorrect Printhead Missing Printhead Printhead Order Automatic Alignment Failed Print Carrier Stall Print Incomplete Printhead Short Printhead Programming Description Action There is paper jammed Clear the paper jam in the All-In-One. and press the Arrow button. The All-In-One is out of Load paper and press paper. the Arrow button. Printhead ID is not valid. Replace the print cartridge(s). Printhead is missing. Unsupported order of printheads Install print cartridge(s). Install the print cartridges in the correct slots. Automatic alignment has failed. May be due to the following: • A bad sensor • Performed alignment on reused paper • Cartridge low on ink or out of ink • Tape was left on cartridge Follow the instruction on the LCD to recover and align the cartridges. The All-In-One print carrier has stalled. Print is incomplete and there is an incorrect home position. Remove mechanical jam and press the Arrow or Cancel button. The print carrier stopped before all the data was used. This error is reported as Print Carrier Stall (1200). Short test detected short-circuit in printhead. Replace print cartridge(s). Unable to program pseudo-random printhead ID Replace print cartridge(s). 2-8 Service Manual