Lexmark X3330 Service Manual - Page 57
Carrier assembly and encoder strip removal, Disconnect both ends B of the encoder strip.
View all Lexmark X3330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Carrier assembly and encoder strip removal 1. Remove the scanner module assembly. 2. Remove the print engine. 3. Disconnect the flat printhead cables and clip (A). 4479-XXX 4. Disconnect both ends (B) of the encoder strip. 5. Remove the encoder strip. Note: When installing an encoder strip, make sure that the arrow on right end is pointing down. Repair information 4-15
4479-XXX
Repair information
4-15
Carrier assembly and encoder strip removal
1.
Remove the scanner module assembly.
2.
Remove the print engine.
3.
Disconnect the flat printhead cables and clip (A).
4.
Disconnect both ends (B) of the encoder strip.
5.
Remove the encoder strip.
Note:
When installing an encoder strip, make sure that the arrow on right
end is pointing down.