Lexmark X644E IPDS Printer and Host Setup Guide - Page 39

TCP/IP Settings, Parameter, Value, Activate, Ready, Menus, Network/Ports., Select, TCP/IP

Get Lexmark X644E - With Modem Taa/gov PDF manuals and user guides
UPC - 734646093156
View all Lexmark X644E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server c) Now select Tuning Options. The Job Interval Shutdown Timer indicates the number of seconds PSF/2 waits before shutting down when there are no jobs in the queue. In other words this is the amount of time that PSF/2 remains active after the last job is printed. Valid values: integers 1 to 9999 1-9998 time in seconds to wait between jobs 9999 wait indefinitely for the next job to be received. Step 4 Configure the Printer's Print Server TCP/IP Settings To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print server, several settings must be verified. You can verify these settings from the printer control panel as shown below. 1 From a Ready state press the MENU button (printers) or touch (Menus on MFPs). 2 Use the navigation buttons or icons to scroll to Network/Ports. 3 Select Network/Ports. TIp: To do this on printers, press the Select button ; on MFPs just touch Network/Ports. 4 Now you will see a list of menus. Select the TCP/IP menu. 5 Use the navigation buttons or icons to scroll through the options. Check each of the following settings and change them as needed to configure TCP/IP communication. TCP/IP Settings Parameter Value Activate On (Printers: Must be "On" to enable TCP/IP communi- cations. MFPs: not displayed.) 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
39
IPDS Printer and Host Setup Guide
PSF/2 LAN Printing Using an Internal LAN Print Server
c)
Now select Tuning Options.
The Job Interval Shutdown Timer indicates the number of seconds PSF/2 waits before shutting down when
there are no jobs in the queue. In other words this is the amount of time that PSF/2 remains active after the last
job is printed.
Valid values:
integers 1 to 9999
1-9998 time in seconds to wait between jobs
9999 wait indefinitely for the next job to be received.
Step 4
Configure the Printer’s Print Server TCP/IP Settings
To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print server, several settings
must be verified. You can verify these settings from the printer control panel as shown below.
1
From a
Ready
state press the
MENU
button (printers) or touch
(
Menus
on MFPs).
2
Use the navigation buttons or icons
to scroll to
Network/Ports.
3
Select
Network/Ports
.
TIp: To do this on printers,
press the
Select
button
; on MFPs just touch
Network/Ports
.
4
Now you will see a list of menus. Select the
TCP/IP
menu
.
5
Use the navigation buttons or icons to scroll through the options. Check each of the following settings and
change them as needed to configure TCP/IP communication.
TCP/IP Settings
Parameter
Value
Activate
On
(Printers: Must
be "On" to enable TCP/IP communi-
cations. MFPs: not displayed.)