Lexmark X792 User's Guide - Page 159

Understanding printer menus Menu item Portrait Height 3-48 inches 76-1219 mm Feed Direction Short Edge Long Edge Bin Setup menu Menu item Output Bin Standard Bin Bin [x] Configure Bins Mailbox Link Mail Overflow Link Optional Type Assignment Overflow Bin Standard Bin Bin [x] 159 Description Sets the portrait height Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. 356 mm is the international factory default setting. • The height can be increased in 0.01‑inch or in 1‑mm increments. Specifies the feed direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray. Description Specifies the default exit bin Note: Standard Bin is the factory default setting. Specifies configuration options for exit bins Notes: • Mailbox is the factory default setting. This setting treats each bin as a separate mailbox. • Link configures all available bins as one large exit bin. • Mail Overflow assigns an overflow bin when the mailbox bins become full. • Link Optional links together all available exit bins except the standard bin and only appears when at least two optional bins are installed. • Type Assignment assigns each paper type to an exit bin or linked bin set. • Bins assigned the same name are automatically linked unless Link Optional is selected. Specifies an alternate exit bin when a designated bin is full Note: Standard Bin is the factory default setting.