Lexmark X792 User's Guide - Page 220

Understanding printer menus 220 Hole Punch Off On Specifies whether prints have punched holes Notes: • Off is the factory default setting. • This menu appears only when a stapler is installed. Hole Punch Mode 2 holes 3 holes 4 holes Determines the type of punch finishing performed on a print Notes: • 3 holes is the US factory default setting. 4 holes is the international factory default setting. • This menu appears only when a puncher is installed. Duplex Binding Long Edge Short Edge Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page Notes: • Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape). • Short edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape). Paper Saver Orientation Specifies the orientation of a multiple‑page document Auto Note: Auto is the factory default setting. The printer chooses between portrait and landscape Landscape Portrait Paper Saver Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up Paper Saver Border None Solid Specifies that multiple‑page images be printed on one side of a paper Notes: • Off is the factory default setting. • The number selected is the number of page images that will print per side. Prints a border around each page image Note: None is the factory default setting. Paper Saver Ordering Horizontal Reverse Horizontal Reverse Vertical Vertical Specifies the positioning of multiple‑page images Notes: • Horizontal is the factory default setting. • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.