Lexmark X792 User's Guide - Page 83
Unlinking trays, Linking exit bins, Creating a custom name for a paper type, Warning-Potential Damage
View all Lexmark X792 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Loading paper and specialty media 83 The printer automatically senses the Paper Size setting according to the position of the paper guides in each tray except the standard 550‑sheet tray and the multipurpose feeder. The printer can sense A4, A5, JIS B5, Letter, Legal, Executive, and Universal paper sizes. The multipurpose feeder and trays using other paper sizes can be linked manually using the Paper Size menu available from the Paper Size/Type menu. Note: To link the multipurpose feeder, Configure MP must be set to Cassette in the Paper menu in order for MP Feeder Size to appear as a menu item. The Paper Type setting must be set for all trays from the Paper Type menu available from the Paper Size/Type menu. Unlinking trays Note: Trays that do not have the same settings as any other tray are not linked. Change one of the following tray settings: • Paper Type Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type [x], or define your own custom name. • Paper Size Load a different paper size to automatically change the Paper Size setting for a tray. Paper Size settings for the multipurpose feeder are not automatic; they must be set manually from the Paper Size menu. Warning-Potential Damage: Do not assign a Paper Type name that does not accurately describe the type of paper loaded in a tray. The temperature of the fuser varies according to the specified Paper Type. Prints may not be properly processed if an inaccurate Paper Type is selected. Linking exit bins Link exit bins to create a single output source. The printer automatically uses the next available bin as the output source. The standard exit bin holds up to 550 sheets of 20‑lb paper. If you need additional output capacity, you can purchase other optional exit bins. Note: Not all exit bins support every paper size and type. 1 From the home screen, navigate to: > Paper Menu > Bin Setup 2 Touch the bin or bins you want to link, and then touch Configure Bins > Link. Creating a custom name for a paper type If the printer is on a network, you can use the Embedded Web Server to define a name other than Custom Type [x] for each of the custom paper types loaded into the printer. 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.