Lexmark X792 User's Guide - Page 280

Troubleshooting 280 51 Defective flash detected Try one or more of the following: • Touch Continue to clear the message and continue printing. • Cancel the current print job. 52 Not enough free space in flash memory for resources Try one or more of the following: • Touch Continue to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Upgrade to a larger capacity flash memory card. 53 Unformatted flash detected Try one or more of the following: • Touch Continue to stop the defragment operation and continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing. 54 Network [x] software error Try one or more of the following: • Touch Continue to continue printing. • Turn the printer off, wait for about 10 seconds, and then turn the printer back on. • Upgrade (flash) the network firmware in the printer. 54 Serial option [x] error Try one or more of the following: • Check that the serial cable is connected properly and is the correct one for the serial port. • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and on the host computer. • Touch Continue to continue printing. • Turn the printer power off and then back on to reset the printer. 54 Standard network software error Try one or more of the following: • Touch Continue to continue printing. • Turn the printer off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server.