Lexmark XC9245 Users Guide PDF - Page 203
Shipping the printer, Saving energy and paper, Configuring the power save mode settings
View all Lexmark XC9245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Maintaining the printer 203 • Any cart used to move the hardware options must have a surface able to support the dimensions of the options. • Keep the printer in an upright position. • Avoid severe jarring movements. • Make sure that your fingers are not under the printer when you set it down. • Make sure that there is adequate clearance around the printer. Note: Damage to the printer caused by improper moving is not covered by the printer warranty. Shipping the printer For shipping instructions, go to http://support.lexmark.com or contact customer support. Saving energy and paper Configuring the power save mode settings Sleep mode 1 From the home screen, touch Settings > Device > Power Management > Timeouts > Sleep Mode. 2 Specify the amount of time that the printer stays idle before it enters Sleep Mode. Hibernate mode 1 From the home screen, touch Settings > Device > Power Management > Timeouts > Hibernate Timeout. 2 Select the amount of time that the printer stays idle before it enters Hibernate mode. Notes: • For Hibernate Timeout to work, set Hibernate Timeout on Connection to Hibernate. • The Embedded Web Server is disabled when the printer is in Hibernate mode. Adjusting the brightness of the printer display 1 From the home screen, touch Settings > Device > Preferences > Screen Brightness. 2 Adjust the setting. Conserving supplies • Print on both sides of the paper. Note: Two-sided printing is the default setting in the print driver. • Print multiple pages on a single sheet of paper. • Use the preview feature to see how the document looks like before printing it. • Print one copy of the document to check its content and format for accuracy.