Lexmark XC9245 Users Guide PDF - Page 60
Faxing, Setting up the printer to fax, Configuring the SMTP server for fax
View all Lexmark XC9245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Faxing 60 Faxing Setting up the printer to fax Notes: • The following connection methods are applicable only in some countries or regions. • During the initial printer setup, clear the fax function check box and any other function you plan to set up later, and then touch Continue. • The indicator light may blink red if the fax function is enabled and not fully set up. Warning-Potential Damage: Do not touch cables or the printer in the area shown while actively sending or receiving a fax. Configuring the SMTP server for fax From the control panel 1 From the control panel, touch Settings > Fax > Fax Server Setup > Fax Server E‑mail Settings. 2 Configure the settings. Note: To use the SMTP server setting for e‑mail, enable Use E‑mail SMTP Server. From the Embedded Web Server 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax > Fax Server Setup. 3 From the Fax Server E‑mail Settings section, configure the settings. Note: To use the SMTP server setting for e‑mail, enable Use E‑mail SMTP Server. 4 Click Save.