Linksys NSS2000 Cisco NSS2000 Series Network Storage System Administration Gui - Page 134

Maintaining the NSS Managing the NSS Configuration 7 • Reset the Network Settings to Enable you to Access the Configuration Interface: If there is a problem with the NSS that results in your not being able to access the NSS configuration interface, you might need to reset the network settings. This lets you access the interface and make the changes required to resolve the problem. To reset the network settings, first shut down the system and power it off. Press and hold the recessed Reset button on the front panel of the chassis, and then apply power to the system. Wait until you see the Power LED on the front of the chassis flash yellow rapidly, and then release the Reset button. Note the following settings are reset to their default: - Link Addressing: DHCP - NSS Hostname: nas For example, "nas0123456789ab" - Network Ports: The network ports are reset to their default as described in the Network Ports topic. See "Configuring the Network Ports" section on page 34. - VLANs: All configured VLANs are deleted. - ADS Server: ADS server settings are cleared. - DNS: DNS settings are cleared. - Administrator Password: admin - Network Filters: cleared - Network Default Policy: Accept All - MTU Size: 1500 Managing the NSS Configuration You can save the current configuration settings within a configuration file that can be used to restore the settings at a later time. You can choose to save the configuration file to a volume on the NSS or you can save the file to a USB flash device that is inserted into the AUX-1 port on the back of the chassis. When you save the configuration file, it is time and date stamped and becomes available in the list of available configuration files when you click the Restore button from the Cisco Small Business NSS2000 Series Administration Guide 126