Linksys NSS2000 Cisco NSS2000 Series Network Storage System Administration Gui - Page 56
Migrating a RAID Array to another Storage Device
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Configuring your Storage Migrating a RAID Array to another Storage Device 4 Migrating a RAID Array to another Storage Device After you build a RAID array, you can migrate it to a different NSS as required. Note that you cannot migrate a RAID to or from the NSS4000. You can migrate a RAID array to or from any of the other NSS models. If you are migrating a RAID array from the NSS to another network NSS, ensure that you coldplug the RAID array (versus hotplug it) into the new system as per the following: STEP 1 Power down the NSS (from which you are removing the RAID array). STEP 2 Remove each of the disk drives that make up the RAID array to be moved. STEP 3 Power down the NSS to which you are migrating the RAID array. STEP 4 Insert each of the disk drives in the RAID array into the new NSS. NOTE: You can install the drives into the new NSS in any order (that is, you do not need to install them in the same order or slots that they were installed in the original NSS). STEP 5 When all the disk drives are installed, power up the NSS. STEP 6 If any local users were assigned permissions to shares on the RAID array, you must either save the configuration from the original RAID array device and then upload it to the new NSS, or manually reconfigure the users and their share permissions. Cisco Small Business NSS2000 Series Administration Guide 48
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-administration-guide-5b9d8ef/56.png)