Linksys NSS2000 Cisco NSS2000 Series Network Storage System Administration Gui - Page 31
Priority, Label, VLAN Configuration, Network IP, Network Configuration, STEP 3
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Adding the NSS to your Network Allowing a VLAN Access to the NSS 3 • Link: This shows as "1" for the Ethernet link. • VLAN: Enter the ID of the VLAN as it is defined within your network. The range of valid VLAN IDs is from 1 to 4095. • Priority: Select the QoS priority for the VLAN traffic as it is defined for your network. Valid options range from 0 to 7 (as defined by the IEEE 802.1p standard). VLAN Ethernet frames contain a three-bit priority tag ranging from 0 to 7 (where 0 is best effort and 7 is network-critical traffic). • Label: Enter a text description for the VLAN (for example, "Data", "Voice", "Video", etc.). It can be made up of alphanumeric characters. Note that this description is used solely as a reference within the NSS interface and does not affect its operation. STEP 3 Click Add. The newly added VLAN appears in the VLAN Configuration table. A message appears to advise that the VLAN does not take effect until you configure the IP address. STEP 4 Click OK. The Network IP page appears. The newly added VLAN appears in the list. STEP 5 Click Edit for the VLAN you need to configure. The Network Configuration page appears. Cisco Small Business NSS2000 Series Administration Guide 23
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-administration-guide-5b9d8ef/31.png)