Linksys NSS2000 Cisco NSS2000 Series Network Storage System Administration Gui - Page 53
Creating a RAID Array
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Configuring your Storage Creating a RAID Array 4 Creating a RAID Array After you install the physical disks, you can create the RAID arrays. Before you create a RAID array, either for the first time, or when you are rebuilding it as a result of failed disks in the array, it is a good idea to set the Rebuild Priority (see "Storage Options" section on page 65) to determine how you want to allocate the system resources for the rebuild. NOTE: When adding disks to an array, we recommend you use the same model of disk with the same capacity. With the exception of a JBOD, RAIDs are configured to use the maximum of the smallest disk capacity in the array for each additional disk in the array. For example, if you install one, 250 GB disk and one 500 GB disk in a RAID0 array, the total capacity is only 500 GB. To create an array: STEP 1 From the Manager Menu, click Storage RAID. The RAID page appears: Cisco Small Business NSS2000 Series Administration Guide 45
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-administration-guide-5b9d8ef/53.png)