Linksys NSS2000 Cisco NSS2000 Series Network Storage System Administration Gui - Page 25

Viewing the Network Settings

Page 25 highlights

Adding the NSS to your Network Viewing the Network Settings 3 Viewing the Network Settings The Network Device Settings page displays information about the physical and virtual interfaces currently configured on the NSS. NOTE: If you hotplug the Ethernet link after the initial installation of the NSS, make sure you wait 15 seconds between the time you unplug the cable and then plug it back in. The NSS displays the correct new settings within 10 seconds. To display the Network Device Settings page, from the Manager Menu, click Network IP. The Network Device Settings table displays the following: • Link: The number of the physical link attached to the NSS. It appears as 1. • VLAN: The ID assigned to the virtual interface. For physical interfaces, this column is blank. Cisco Small Business NSS2000 Series Administration Guide 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186

Adding the NSS to your Network
Viewing the Network Settings
Cisco Small Business NSS2000 Series Administration Guide
17
3
Viewing the Network Settings
The
Network Device Settings
page displays information about the physical and
virtual interfaces currently configured on the NSS.
To display the
Network Device Settings
page, from the
Manager Menu
, click
Network
¨
IP.
The
Network Device Settings
table displays the following:
Link:
The number of the physical link attached to the NSS. It appears as 1.
VLAN:
The ID assigned to the virtual interface. For physical interfaces, this
column is blank.
NOTE:
If you hotplug the Ethernet link after
the initial installation of the NSS, make sure you
wait 15 seconds between the time you unplug
the cable and then plug it back in. The NSS
displays the correct new settings within 10
seconds.