Linksys NSS2000 Cisco NSS2000 Series Network Storage System Administration Gui - Page 142
Configuring the Timing Settings
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Maintaining the NSS Configuring the Timing Settings 7 Configuring the Timing Settings When you first configure the NSS, ensure that the NSS has successfully synchronized the time with the NTP server. When the NSS is synchronizing with the NTP time server, the "Synchronizing time with NTP server" message appears and the Update button is grayed out. After the synchronization is complete, you can manually refresh the page by reselecting the NTP Configuration page from the Manager Menu. If the synchronization failed, the following occurs: • An error message stating "Could not synchronize with NTP server(s)" appears in the NTP Configuration page. • The system alert message "Could not synchronize with NTP server(s)" appears in the System Status page. • If the SNMP traps are configured, an SNMP trap message is sent. To configure the time settings for the NSS: STEP 1 From the Manager Menu, click Admin Time. The NTP Configuration page appears. STEP 2 To use an NTP server to maintain the NSS time, click Automatically (via NTP). To assign the time manually, skip to step 4. Cisco Small Business NSS2000 Series Administration Guide 134
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-administration-guide-5b9d8ef/142.png)