Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 105
Available Access Filters, Subnet, Filter, Network Filters
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Setting up End-User Access Available Access Filters 5 • Subnet: Enter the subnet to set a filter for all the addresses within the subnet. The format should appear as shown in the following example: 192.168.1.0/24 (where the digits following the slash represent the number of bits in the network portion of the IP address). STEP 3 From the Filter drop-down menu, select the type of filter you want to apply to the IP/MAC address. STEP 4 Click Add. Any connections that apply to the new filter rule are affected by the rule during the next connection attempt. Available Access Filters When you configure network filters, determine which protocols can or cannot access the NSS. To display the list of available filters, click the drop-down arrow next to the Filter field on the Network Filters page. Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 97