Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 84

Setting up End-User Access Editing a User Profile 5 STEP 5 Assign a password by entering any valid (ASCII table) characters in the Password field. The password is required. STEP 6 To verify the password, re-enter it in the Confirm Password field. NOTE All password changes to end-user accounts set up through the NSS configuration pages must be made by the administrator. STEP 7 To record the user's full name, enter it in the Real Name field. This field is optional. You cannot enter the "/" character in this field. STEP 8 To record the user's email address, enter it in the Email Address field. This field is optional. STEP 9 Click OK to create the user and exit the New User page. Click Apply to create the user and then add another new user. Editing a User Profile You can change certain aspects of the user's profile. Note that once you create a username, the only way to "rename" that user is to delete the existing user profile and then create a new one. If the user profile resides on an ADS, NTv4, or NIS domain, you need to edit the profile from the applicable domain manager. All password changes for end-user accounts set up directly through the NSS configuration pages must be done by the Administrator. To edit an existing user profile: STEP 1 From the Manager Menu, click Access Users. Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 76