Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 149
TP Configuration, System Status, Manager Menu, Admin, NTP Configuration, click Automatically via NTP
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Managing the NSS Configuring the Timing Settings 7 If the synchronization failed, the following occurs: • An error message stating "Could not synchronize with NTP server(s)" appears in the NTP Configuration page. • The system alert message "Could not synchronize with NTP server(s)" appears in the System Status page. • If the SNMP traps are configured, an SNMP trap message is sent. To configure the time settings for the NSS: STEP 1 From the Manager Menu, click Admin Time. The NTP Configuration page appears. STEP 2 To use an NTP server to maintain the NSS time, click Automatically (via NTP). To assign the time manually, skip to step 4. NOTE If the NSS joins to the ADS domain, you must enter the IP address of the domain controller into the NTP server field and uncheck Assign automatically via DHCP. Otherwise, the NSS will not join the domain. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 141