Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 165
LAN LED (Front Panel), Hard Disk Drive LEDs
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Troubleshooting Hard Disk Drive LEDs A LAN LED (Front Panel) The LAN LED shows the status of the Ethernet link. These are the LED colors and their meanings: • Solid Green: The LAN link is up and running at 1000 link speed, but is currently idle. • Flickering Green: The LAN link is up and running at 1000 link speed and is currently active. The LED flickers off with activity. • Solid Yellow: The LAN link is up and running at 10/100 link speed, but is currently idle. • Flickering Yellow: The LAN link is up and running at 10/100 link speed and is currently active. The LED flickers off with activity. • Off: No LAN link is detected. Hard Disk Drive LEDs These LEDs shows the disk-drive activity, the error conditions, and locate statte of the .installed disk drives. The green LED indicates drive activity. These are the LED colors and their meanings. • Solid Green: The disk drive is configured but is currently idle. • Flickering Green: The disk drive is configured, active, and not rebuilding. Flickers off with activity. • Blinking Green: The disk drive is configured and a RAID array is currently rebuilding to the disk drive. • Off: The disk drive is not configured (not part of a RAID or JBOD array and not exported). The red LED means that the drive is in an error condition. These are the LED colors and their meanings • Solid Red: The drive is in a failed state. • Blinking Red: The drive is predicated to fail (via S.M.A.R.T.). We recommend that you replace the drive to avoid the loss of data. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 157