Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 172
Cannot Access the NSS through FTP, Manager Menu, Storage, Volumes., Unlock, Action, Shares, FTP Setup
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Troubleshooting Cannot Access the NSS through FTP A To resolve the problem: STEP 1 From the Manager Menu, click Storage Volumes. If the problem is due to the volume being locked, the Unlock button appears next to the volume in the Action column. STEP 2 Click Unlock. STEP 3 Enter the password for the volume. STEP 4 Click OK. You can now be create a share or quota for the volume. Cannot Access the NSS through FTP Users attempt to log into the NSS through FTP but are unable to access their home directory or shares on the NSS. To resolve the problem, you need to configure these settings to enable FTP access: STEP 1 From the Manager Menu, click Shares FTP Setup. STEP 2 Make sure that Enable FTP is selected. (You can go through the settings on this page to ensure they are correctly defined.) STEP 3 Close the FTP Setup page. STEP 4 From the Manager Menu, click Shares Shares. STEP 5 Click Edit for the applicable share. STEP 6 Make sure the FTP protocol is selected, and then click Update. STEP 7 From the Manager Menu, click Access Network. STEP 8 Make sure there are no filters set up to drop or reject FTP access for the applicable IP or MAC addresses. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 164
![](/manual_guide/products/linksys-nss6100-cisco-nss4000-nss6000-series-network-storage-administration-guide-69796a6/172.png)