Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 125
Passive Mode FTP, Manager Menu, Network, Ports., Network Port Configuration, FTP/FTPS, Server Port,
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Managing the Shares Configuring the NSS for FTP Access 6 Select this option if the NSS is located behind a firewall and/or router. By default, the FTP server sets the NSS IP address to passive mode. NOTE Passive Mode FTP through a router and/or firewall only works on a single interface. If you have VLANs defined, you must choose which interface to access through FTP. To configure Passive Mode FTP, follow these steps: STEP 1 From the Manager Menu, click Network Ports. The Network Port Configuration page appears. STEP 2 Verify the FTP port number on the NSS (port number 21 is the default setting). To use a non-default port number, enter the new port number in the FTP/FTPS Server Port field (For example: 8028) and then click Update. You must also specify this port number in your router configuration software. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 117