Linksys NSS2000 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 53
Adding a Disk Drive to an Array, New RAID Device, RAID Level, Storage Status, RAID Arrays
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Configuring your Storage Adding a Disk Drive to an Array 4 STEP 2 The available disks appear in the New RAID Device table. Select each disk that you want to include in the array. STEP 3 From the RAID Level drop-down menu, click the RAID level of the RAID array you want to create. STEP 4 Click Add. STEP 5 The RAID creation can take some time to complete (depending on the size of the disks and the selected RAID level). You can monitor the progress of the RAID build from the Storage Status page. When the build is finished, the array appears in the RAID Arrays table. The disks used in the array are no longer available for creating additional arrays. Adding a Disk Drive to an Array You can add additional disks to an existing RAID1 or RAID5. As long as the array is clean, these disks then become spares. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 45