Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 14
System Alerts, Storage Status, Error, Warning, Notification, Storage, Drives, RAID Arrays, Volumes
UPC - 745883578818
View all Linksys NSS4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Managing the System System Alerts 2 System Alerts The System Alerts section shows any system messages issued since the last time they were cleared. Messages can range in severity from informational to immediate action required. There are three type of system alerts: • Error: Indicates the most severe types of problems with the NSS. They are color-coded red and require immediate action. For example, if a disk drive or RAID array is in a failed condition. • Warning: Indicates that there is a problem with the NSS that requires eventual action. They are color-coded orange. For example, if the amount of storage used for a volume is over 90%. • Notification: Shows the recent changes to the NSS. They do not require action and are color-coded green. For example, the RAID rebuild is complete. Storage Status The Storage area displays these details about the configured storage on the NSS: • Drives: The number of physical disk drives installed. • RAID Arrays: The number of configured RAID arrays. • Volumes: The number of configured volumes. • Total Configured Capacity: The total aggregate size of all configured volumes. • Percent Used: The total amount of the configured capacity used. The percentage is color-coded according to the current percentage used: - Green: 0 to 74% - Orange: 75 to 89% - Red: 90 to 100% Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 6