Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 54
Manager Menu, Storage, RAID Arrays, STEP 1
![]() |
UPC - 745883578818
View all Linksys NSS4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Configuring your Storage Adding a Disk Drive to an Array 4 NOTE When adding disks to an array, we recommend that you use the same model of disk with the same capacity. The new disk must have at least the same capacity of the smallest disk currently in the array. With the exception of a JBOD, RAIDs are configured to use the maximum of the smallest disk capacity in the array for each additional disk in the array. For example, if you install two, 250 GB disks and one 500 GB disk, the total capacity is 750 GB. To add a disk to an array: STEP 1 If not already installed in the chassis, insert the disk in the NSS. STEP 2 From the Manager Menu, click Storage RAID. The RAID page appears. STEP 3 In the RAID Arrays table, click Edit for the applicable RAID array. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 46
![](/manual_guide/products/linksys-nss6100-cisco-nss4000-nss6000-series-network-storage-administration-guide-69796a6/54.png)